| [d8c] img_1129.jpg |
 |
| |
| [d8d] img_1129_processed.jpg |
 |
| |
| [d8e] img_1130.jpg |
 |
| |
| [d8f] img_1131.jpg |
 |
| |
| [d90] img_1132.jpg |
 |
| |
| [d91] img_1134.jpg |
 |
| Future Ronja Gym Bar Console
| |
| [d92] img_1135.jpg |
 |
| ronja Gym Bar Console with it's 2 shoes soles taken from a second hand shoes pai
| |
| [d93] img_1136.jpg |
 |
| closeup: we see the two threaded rods going out their tube
| |
| [d94] img_1137.jpg |
 |
| Another closeup, very blured, but useful to see how it's build:
| |
| [d95] img_1138.jpg |
 |
| Resistance test with my 73 Kg, it didn't move a single mm
| |
| [d96] img_1139.jpg |
 |
| My feet don't touch the ground....
| |
| [d97] img_1141.jpg |
 |
| Mounted console
| |
| [d98] img_1144.jpg |
 |
| A little modified holders: a little smaller L which is a 80x80x8 and only 3 holes for the rubbers.
| |
| [d99] img_1147.jpg |
 |
| Receiver fine pointing.
| |
| [d9a] img_1152.jpg |
 |
| A long exposition photo of the wall inside the room showing the shadow of the window and the installation
| |
| [d9b] img_1153.jpg |
 |
| |
| [d9c] img_1155.jpg |
 |
| |
| [d9d] img_1156.jpg |
 |
| |
| [d9e] img_1157.jpg |
 |
| |
| [d9f] img_1158.jpg |
 |
| |
| [da0] img_1159.jpg |
 |
| |
| [da1] img_1159_crop.jpg |
 |
| |
| [da2] img_1160.jpg |
 |
| |
| [da3] img_1161.jpg |
 |
| Mini-ITX VE5000, 500Mhz, AUI Ethernet, Wi-fi Orinocco card, Linux debian, Zebra, OSPF (transparent wifi fail-over), flash hd, no fan, no noise, 12W power consumption.
| |
| [da4] img_1162.jpg |
 |
| |
| [da5] img_1163.jpg |
 |
| A cable going through the console part is visible.
| |
| [da6] img_1164.jpg |
 |
| |
| [da7] img_1165.jpg |
 |
| Pipes temporarily closed with adhesive tape
| |
| [da8] img_1166.jpg |
 |
| |
| [da9] img_1292.jpg |
 |
| |
| [daa] img_1293.jpg |
 |
| fog
| |
| [dab] img_1294.jpg |
 |
| |
| [dac] img_1295.jpg |
 |
| |
| [dad] img_1296.jpg |
 |
| |
| [dae] img_1297.jpg |
 |
| |
| [daf] img_1330.jpg |
 |
| AUI interfaces under construction
| |
| [db0] img_1331.jpg |
 |
| |
| [db1] img_1332.jpg |
 |
| |
| [db2] img_1333.jpg |
 |
| the other side
| |
| [db3] img_1334.jpg |
 |
| aui to utp hack, external ps
| |
| [db4] img_1335.jpg |
 |
| |
| [db5] img_1336.jpg |
 |
| |
| [db6] img_1337.jpg |
 |
| |
| [db7] img_1338.jpg |
 |
| white wire mounted on the receiver is an anti pigeons system ;)
| |
| [db8] img_1340.jpg |
 |
| |
| [db9] img_1341.jpg |
 |
| |
| [dba] img_1342.jpg |
 |
| |
| [dbb] img_1343.jpg |
 |
| sealed receiver
| |
| [dbc] img_1344.jpg |
 |
| aui hack described in Ronja FAQ
| |
| [dbd] img_1346.jpg |
 |
| aui hack described in Ronja FAQ
| |
| [dbe] img_1347.jpg |
 |
| Closeup on the maintenance opening
| |
| [dbf] img_1348.jpg |
 |
| Detail of the flat sfh203 and the best spot I get
| |
| [dc0] img_1349.jpg |
 |
| |
| [dc1] img_1350.jpg |
 |
| |
| [dc2] img_1351.jpg |
 |
| |
| [dc3] img_1352.jpg |
 |
| |
